I am going to be buying the parts for this in the near future, and wanted to make sure I have everything I'll need.

TURBO-MANIFOLD GASKET (2) MD168266
TURBO-02 HOUSING GASKET (2) MR188537
OIL RETURN LINE FRONT MD160039
OIL RETURN LINE REAR MR266015
EGR PIPE GASKET (2) MD149764
DOWN PIPE GASKETS (3)
UPPER INTAKE MANIFOLD GASKET
THROTTLE BODY GASKET
TURBO-MANIFOLD SEAL RING (2) MD077551
OIL RETURN LINE GASKET (4) MR258477
COOLANT LINE COPPER WASHER GASKET (20) MF660064
OIL FEED LINE COPPER WASHERS (10) MF660063

Any other expected necessities?

_________________

I don't think new oil return lines are necessary. It is relatively easy to clean out the old lines with a long pipe cleaner. Those are also the most expensive parts on that list.

Also, if you don't remove the thottle body from the intake manifold (which doen't need to be removed), then you don't need that gasket.

Brad

_________________
Brad
92&93 RT TT

Mods:
TD04L 13T's | Alamo Side Mount Intercoolers | RC 550 cc injectors | Supra fuel pump | SBC DXD 6-puck | 3SX Poly Motor Mount | TySpeed DP w/ TP | custom Magnaflow exhaust | DSBC | S-AFC | + much more

Thx. I know you dont have to replace the oil lines, I want to. I've had my intake man out like 48 times since I got new gaskets for it and the throttle body, so I'm due.

_________________

So how much are you getting quoted for these parts?

I'm replacing my turbos soon too.
Just got the 19Ts in the mail.

Jason

Turbo seal rings are a pain. everybody told me I did not need them. I put them on anyway, but they were a huge pain. mainly on the front turbo.

aren't you putting on different headers? or am I thinking of someone else?

also not seen on your list:
Miller Lite
Fire Water

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

That's a given, no?

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net

I tell everyone they DO need them. It's a game of chance you play when it comes to reusing stuff like that. I don't know about you, but it's bad enough to remove them with the motor in the car, it's even worse to do it 2x.

Also, I don't see Taco Bell on the list.

_________________
06 Blue EVO 9

See above previous statement. I mean, these are now part of our MO, right?

I lived on Taco Bell at the NG for crying out loud. They kept asking me, "You're not Greg -- where's the green car?"

SJ

_________________


Racing is life. Everything else is just waiting.

http://umg.mn3s.org

http://ummo.boards.net

Sadly, unclebenny drinks the uber DJ auggiest pown-sauce known as Bud Light. He likes Missouri more than Wisconsin, apparently.

_________________
"Well-weathered leather, hot metal and oil, the scented country air,
Sunlight on chrome, the blur of the landscape, every nerve aware..."



meastie beastie

Here is my parts list and prices for my turbo swap. I placed this order this week from Rockville Mits. Some of the stuff isn't for the turbo swap, but most of it is. I am sure I will need more as I dive into it.

Vendor Part Number Description Quantity Price/Each Extended Price
MIT MD168266 GASKET,T/C EXHAUST GAS 2 $ 3.73 $ 7.46
MIT MD143791 GASKET,ENG AIR INTAKE S 1 $ 6.19 $ 6.19
MIT MD149764 GASKET,EXHAUST MANIFOLD 1 $ 4.37 $ 4.37
MIT MB658136 FUEL FILTER 1 $ 17.19 $ 17.19
MIT MD087060 INSULATOR,FUEL INJECTOR 6 $ 1.24 $ 7.44
MIT 1465A188 O-RING,FUEL INJECTOR 6 $ 2.29 $ 13.74
MIT MD186786 GASKET,ROCKER COVER 2 $ 13.24 $ 26.48
MIT MR188537 GASKET,T/C EXHAUST OUTL 2 $ 3.49 $ 6.98
MIT MR258477 * GASKET,T/C OIL RET 4 $ 0.96 $ 3.84
MIT MF241225 BOLT,CRANK ANGLE SENSOR 4 $ 0.64 $ 2.56
MIT MD193110 BOLT,T/C 4 $ 0.64 $ 2.56
MIT MD090788 O-RING,ENG AIR INTAKE L 1 $ 3.23 $ 3.23
MIT MD165887 STUD,CATALYTIC CONVERTE 4 $ 5.34 $ 21.36
MIT MD165887 STUD,CATALYTIC CONVERTE 3 $ 5.34 $ 16.02
MIT MD050074 STUD,T/C 4 $ 3.85 $ 15.40
MIT MD132930 NUT,T/C 2 $ 5.10 $ 10.20
MIT MD132933 WASHER,EXHAUST MANIFOLD 3 $ 0.83 $ 2.49
MIT MD168601 BOLT,T/C 3 $ 4.31 $ 12.93
MIT MR117263 O-RING,A/C PIPING 1 $ 2.80 $ 2.80
MIT MB698929 LENS KIT,OPTICAL HORN,L 1 $ 55.26 $ 55.26
MIT MB698930 *LENS KIT,OPTICAL HON,R 1 $ 56.00 $ 56.00
______________
Subtotal $ 294.50

_________________
Superjfly
'92 VR4

wholly f**k. 5 bucks for a stud. I'm glad I can pick up good studs/bolts at a hardaware store...

oem FTL.

I thought martins hardware was dragging me through the garden at a buck a stud.

_________________
Bad decisions make good stories.
Look at it! LOOK AT MY @SS AND TELL ME IT'S PRETTY!

Yeah I know what you mean. I wasn't sure if I would be able to find them at the HD store. I suck.

_________________
Superjfly
'92 VR4